Electrical service markings question.

verdigo
verdigo Solar Expert Posts: 428 ✭✭
in Solar Beginners Corner #1
I am getting ready to be inspected for a grid interactive setup. Over the last year give or take I have seen a sticker/sign on some of the forum member's meter box that states that the house is powered by more than one source. Is this required and where do I get one?


Thanks

Dennis
· Share on Twitter

Comments

  • Vic
    Vic Solar Expert Posts: 3,208 ✭✭✭✭
    #2
    Re: Electrical service markings question.

    Hi Dennis,

    Check this Thread:
    http://forum.solar-electric.com/showthread.php?8599-Source-for-Warning-Label-and-Signs&highlight=safety+signs

    Your Utility, and AHJ may have some guidance on just what they want to see.
    In the above Link, BB Bill has a Link to what NEC has to say.
    FWIW. Good Luck! Vic
    Off Grid - Two systems -- 4 SW+ 5548 Inverters, Surrette 4KS25 1280 AH X2@48V, 11.1 KW STC PV, 4X MidNite Classic 150 w/ WBjrs, Beta KID on S-530s, MX-60s, MN Bkrs/Boxes.  25 KVA Polyphase Kubota diesel,  Honda Eu6500isa,  Eu3000is-es, Eu2000,  Eu1000 gensets.  Thanks Wind-Sun for this great Forum.
    · Share on Twitter
  • verdigo
    verdigo Solar Expert Posts: 428 ✭✭
    #3
    Re: Electrical service markings question.

    Thanks. The links led me to another vendor with a kit for $51.00. I'll keep the page handy to see if it will satisfy them if they ask. Thanks again.
    · Share on Twitter

Categories