DIY solar panels
jrmadbear
Registered Users Posts: 8 ✭
can anyone tell me if i will need to use solder with the wire you can buy on ebay.
i bought some EVERGREEN cells and want to buy some wire that has the solder already on but was advised ,BY A SELLER ON EBAY, that i would still need to add solder, that the solder on the wire was for "machined" use and would not work on DIY projects. does anyone have experience with this wire, will i need to add solder and is there any wire i will not need to add solder to.
i bought some EVERGREEN cells and want to buy some wire that has the solder already on but was advised ,BY A SELLER ON EBAY, that i would still need to add solder, that the solder on the wire was for "machined" use and would not work on DIY projects. does anyone have experience with this wire, will i need to add solder and is there any wire i will not need to add solder to.
Categories
- All Categories
- 222 Forum & Website
- 130 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 192 Solar Information links & sources, event announcements
- 888 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.4K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 425 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 624 Energy Use & Conservation
- 611 Discussion Forums/Café
- 304 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed