PV Array Flex Conduit

James
Solar Expert Posts: 250 ✭✭
Hi folks, it's been a while since I've
visited the forum. I'm looking for the formula for figuring out the rating for flex conduit on a PV array.
I have used 60 degree (wet) PVC Non-Metallic flex conduit before, but don't know if this is still ok according to the new NEC code. I will be runnig 4 KC130 panels in series (48vdc) to the combiner and would like to use the liquid tite flex conduit since the panels have junction boxes and not MC cables.
will this fly per code?
Thanks
visited the forum. I'm looking for the formula for figuring out the rating for flex conduit on a PV array.
I have used 60 degree (wet) PVC Non-Metallic flex conduit before, but don't know if this is still ok according to the new NEC code. I will be runnig 4 KC130 panels in series (48vdc) to the combiner and would like to use the liquid tite flex conduit since the panels have junction boxes and not MC cables.
will this fly per code?
Thanks
Categories
- All Categories
- 229 Forum & Website
- 137 Solar Forum News and Announcements
- 1.4K Solar News, Reviews, & Product Announcements
- 199 Solar Information links & sources, event announcements
- 898 Solar Product Reviews & Opinions
- 256 Solar Skeptics, Hype, & Scams Corner
- 22.5K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2.1K Advanced Solar Electric Technical Forum
- 5.6K Off Grid Solar & Battery Systems
- 428 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 654 Solar Water Pumping
- 816 Wind Power Generation
- 624 Energy Use & Conservation
- 619 Discussion Forums/Café
- 312 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed