very promising wind turbine design idea, and coming to ace hardware ?!

2»

Comments

  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,908 ✭✭✭✭✭✭
    #32
    Re: very promising wind turbine design idea, and coming to ace hardware ?!
    lamplight wrote: »

    you guys seem highly resistant to new ideas, i am quite surprised. .

    If it were a new idea that did something that was not already available then we could be resistant to it. 100 watts at 10MPH is not new unless it was for $500 !
    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net

    · Share on Twitter
  • lamplight
    lamplight Solar Expert Posts: 368 ✭✭✭✭✭✭
    #33
    Re: very promising wind turbine design idea, and coming to ace hardware ?!

    i'm not sure, but i think im getting the point.
    · Share on Twitter
  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,908 ✭✭✭✭✭✭
    #34
    Re: very promising wind turbine design idea, and coming to ace hardware ?!

    Low wind speed, small diameter power generation is definately the design goal! Not coming apart at high wind speed is also nice. Thanks for the link!
    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net

    · Share on Twitter
  • nigtomdaw
    nigtomdaw Solar Expert Posts: 705 ✭✭
    #35
    Re: very promising wind turbine design idea, and coming to ace hardware ?!

    I have had a 1kw Chinese / Canadian promoted wind turbine in stock for 4 years brand name Cylcone solid build Ive whatched its upgrades and will redesign its implimentation closely however the $2000 Spanish engineers design for my cisterna and windturbine combined structure steel bill alone leaves me focusing on installing my next 1600w of solar panels taking me to 4kw, if I hadnt have met NAWS it would have been possibly disaPOINTably built...........it will be erected one day when i have money to spin
    · Share on Twitter

Categories