Duplicate post-Disregard OpticsRE cannot get account activated

Itchybrain
Itchybrain Registered Users Posts: 3 ✭
edited June 19 in Solar Information links & sources, event announcements #1
Don't see a button to delete this post. Sorry for the duplicate.

Just installed a GS8048a and Mate3s. Went to the Opticsre website, signed up for an account. The system does not send an activation e-mail. Outback Support is unable to help.

Was going with Outback Power a bad decision? Are there other avenues (Enersys?) that can help me get OpticsRE running?


16 (4 series X 4 parallel) 220w 12v panels 48v array
4 Epever charge controllers (now being replaced with Midnight Solar Classic 150 MPPT)
Outback Power GS8048a inverter
16 AGM batteries (4 series x 4 parallel) 48v battery 
Powers 3 bedrooms, well pump and refrigerator. Can transfer to commercial power if needed.
My house has an additional AC Load center with it's own outlets - one in each room. i.e. Two separate electrical systems. Commercial power has white outlets. Solar power has gray outlets. Can switch between commercial power or solar as needed.
Tagged:
· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,690 admin
    #2
    I can delete this post, or let other respond to your question(s) about OpticsRE...

    -Bill "moderator" B.
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter

Categories