Schneider XW+ AGS - how to question

ELYNN4
ELYNN4 Registered Users Posts: 152 ✭✭
in Off Grid Solar & Battery Systems #1
I would like to have the charging load from the XW+ 6848 applied to my generator in smaller increments.  Currently when the generator is started by the AGS and has completed its warm up cycle the load from the XW+ is applied in approximately 25 amp increments over a couple of seconds.  I’m interested in having the load applied in smaller increments over a longer period of time.  Anyone know where/how that adjustment is made?

Thanks in advance,
Off Grid, 4.5KW array, 9&6KW Gens, 6848XW inverter, Midnite Classic 150, 2 strings - 48V - Trojan FLA L16 2V, located in Talkeetna, Alaska
· Share on Twitter

Comments

  • ELYNN4
    ELYNN4 Registered Users Posts: 152 ✭✭
    #2
    Just heard from a Schneider technician that this is not a User adjustable setting… 
    Off Grid, 4.5KW array, 9&6KW Gens, 6848XW inverter, Midnite Classic 150, 2 strings - 48V - Trojan FLA L16 2V, located in Talkeetna, Alaska
    · Share on Twitter

Categories