Inverter output fluctuate when AC input is connected
Tariq_Zia
Registered Users Posts: 4 ✭
I have an offgrid inverter connected to a array of 3000 watt, 48v battery.With only solar input connected,inverter work fine but when i switch on AC input to inverter, Ac output start fluctuate which i can see on light bulb,all the light bulbs start fluctuating.
I was thinking to make both neutrals (Ac in and Ac out) common.will that solve the problem?
I was thinking to make both neutrals (Ac in and Ac out) common.will that solve the problem?
Comments
-
Closing duplicate discussion. Only one needed.
-BillNear San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
This discussion has been closed.
Categories
- All Categories
- 221 Forum & Website
- 129 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 192 Solar Information links & sources, event announcements
- 887 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.4K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 425 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 624 Energy Use & Conservation
- 611 Discussion Forums/Café
- 304 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed