Why Aerial Thermal Imaging are Useful for Solar Defects Inspected ?
Options
kimixiong522
Registered Users, Users Awaiting Email Confirmation Posts: 15 ✭✭
| Because there are 2 major categories of faults that can be detected by using aerial thermal imaging 1.These include individual hot spots on the cells, diode failures, shattered or dirty modules, coating and fogging issues, and junction box heating. 2.Wiring issues (reversed polarity, frayed cables), charge controller issues, and inverter and fuse failures. |
Tagged:
Categories
- All Categories
- 243 Forum & Website
- 150 Solar Forum News and Announcements
- 1.4K Solar News, Reviews, & Product Announcements
- 191 Solar Information links & sources, event announcements
- 919 Solar Product Reviews & Opinions
- 256 Solar Skeptics, Hype, & Scams Corner
- 22.5K Solar Electric Power, Wind Power & Balance of System
- 3.6K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2.1K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 438 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 652 Solar Water Pumping
- 829 Wind Power Generation
- 626 Energy Use & Conservation
- 626 Discussion Forums/Café
- 303 In the Weeds--Member's Choice
- 91 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed