Conergy/Dankoff LCB8 Controller??
gpigeon
Registered Users Posts: 34 ✭✭✭
I have 2 LCB8's that are no longer working properly. As they were around $300 each I would really like to have a go at repairing them.
Have any forum members had a go at repairs to these units? Circuit diagram available?
I currently use a more simple "pump maximiser" that comes in kit form for around $70 but they do not allow the possibility of running a 12V motor from a 24V panel.
Thanks.
Bill W.
Comments
-
You might try calling our host.. I believe they sell some of these devices and may be able to help you.
https://www.solar-electric.com/contacts/
-Bill
Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
Categories
- All Categories
- 222 Forum & Website
- 130 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 192 Solar Information links & sources, event announcements
- 888 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.4K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 426 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 624 Energy Use & Conservation
- 611 Discussion Forums/Café
- 304 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed