Whiz Bang junior ?

Options
arby
arby Solar Expert Posts: 107 ✭✭
in Off Grid Solar & Battery Systems #1
I just got back from the cottage after changing my MX 60 for a Classic 200.
 When I went through the Whiz Bang's settings it said my battery bank was 400AH, which is correct. Surette S530's.
 My question is how did the Whiz Bang know this?
PS: I have a Trimetric attached to the same shunt and I believe that 400 AH is what I have programmed into it. Did the Whiz Bang collect the info from the Trimetric?
3310 watts panels, Classic 200 controller, 8 Surette S530's, Xantrex 5548 inverter, Honda EX5500 backup Genny.
· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,439 admin
    #2
    Options
    No data transfer from the Trimetic (that I can think of).

    400 AH is a good guess/default for a "typical" 48 volt battery bank/off grid power system...

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter
  • arby
    arby Solar Expert Posts: 107 ✭✭
    #3
    Options
    Thanks Bill. :)
    3310 watts panels, Classic 200 controller, 8 Surette S530's, Xantrex 5548 inverter, Honda EX5500 backup Genny.
    · Share on Twitter

Categories