Xantrex Combox and Modbus connections

vomus

Hi!
I am writing a small piece of code that reads off Modbus registeres from Conext Combox and found it seems that Combox allows only one Modbus TCP connection at a time. Did anyone see this as well? Are there any ways to overcome this?

I asked my local Schneider guy but he had no idea what I am talking about.

Thanks in advance,
--Sergei

fca1

Re: Xantrex Combox and Modbus connections

Hi im reading from my combox several registers at the same time .
And is working

tampasolar

If anyone is still here, I've done this modbus comm with the gateway, expect to try on the older ComBox