Wind generator pole and bracing

gactrx

Hi does anyone know if there is a calculator or some info on how many bracing wires, distances from top and bottom, etc needed for a wind generator pole? Can I use just three wires from one point or should I use two sets of three wires?
I have bought a 1000w generator that weighs about 25kg and want to put it on a 10 meter pole made of 78mm OD medium wall thickness galv pipe.
Thanks,

BB.

Re: Wind generator pole and bracing

Otherpower is a good discussion board/site for DIY Wind:

http://www.otherpower.com/otherpower_wind_towers.html

-Bill