OutBack OpticsRE solar plant monitoring on-line APP now is working!

unicornio

Hi guys!
I'm very happy! ... I can already use OpticsRE!

after updating the MATE3 to version 003.003.000, and already connected to the internet, everything worked fine, doing nothing more than opening an account in https://www.opticsre.com/ and enter the MAC address of MATE3, which is now visible on the main screen by pressing the PORT key (which is behind the cover). on this screen there is also an indication that the OpticsRE is working ...

Attachment not found.
Attachment not found.

CONGRATULATIONS to the development team in the application of OutBack OpticsRE!!!
unfortunately I can not say the same to commercial department that has decided to charge 100 bucks for the upgrade of those who already had the MATE3 before March/2014 ...especially after having checked that is not necessary any hardware modification or adding to have the MATE3 working with OpticsRE...

something i say in this post, in the 'OutBack forum:
http://outbackpower.com/forum/viewtopic.php?f=1&t=7670&sid=180e1c8d661548ddf4e08057c3a85a6b

Good day, Mates!...