Trimetric + FlexNet DC = two shunts?
DMJ72
Solar Expert Posts: 131 ✭✭
Hello,
This may seem like a silly question, but does one need two shunts to connect two battery monitors or can they both be connected to one shunt?
Thanks in Advance
DMJ
This may seem like a silly question, but does one need two shunts to connect two battery monitors or can they both be connected to one shunt?
Thanks in Advance
DMJ
Comments
-
Re: Trimetric + FlexNet DC = two shunts?This may seem like a silly question, but does one need two shunts to connect two battery monitors or can they both be connected to one shunt?
The trimetric and flexnet are high resistance voltmeters that read the voltage across the shunt. They can both read the same shunt.
--vtMaps4 X 235watt Samsung, Midnite ePanel, Outback VFX3524 FM60 & mate, 4 Interstate L16, trimetric, Honda eu2000i -
Re: Trimetric + FlexNet DC = two shunts?
Thank you Vtmaps, appreciate it
Categories
- All Categories
- 243 Forum & Website
- 150 Solar Forum News and Announcements
- 1.4K Solar News, Reviews, & Product Announcements
- 189 Solar Information links & sources, event announcements
- 918 Solar Product Reviews & Opinions
- 256 Solar Skeptics, Hype, & Scams Corner
- 22.5K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2.1K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 438 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 652 Solar Water Pumping
- 829 Wind Power Generation
- 625 Energy Use & Conservation
- 624 Discussion Forums/Café
- 301 In the Weeds--Member's Choice
- 91 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed