Wiring Assistance Needed...
2Guido
Solar Expert Posts: 62 ✭✭
Have 2 wind generators. Both 12volt 600w Super PMA low wind. I currently have them in series feeding through a blocking diode and directly wired to a bank of 12volt AGM's. The solar side of my system uses the 440 controller in my profile for a separate 24volt system of inveryers and batteries. Back to the wind issue. Would it make more sense to parallel connect the 2 pmas and do I need a blocking diode at all in this case?? or am i ok the way it is ??
Thanks as always..
Paul
Thanks as always..
Paul
Categories
- All Categories
- 222 Forum & Website
- 130 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 192 Solar Information links & sources, event announcements
- 888 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.4K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 426 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 624 Energy Use & Conservation
- 611 Discussion Forums/Café
- 304 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed