Xantrex wind controller

Kefalonianman
Kefalonianman Solar Expert Posts: 60 ✭✭✭✭
in Wind Power Generation #1
Does anyone know how to connect two 700w wind turbines with break facility to an xantrex system so I can use the xantrex software to monitor my whole system at the moment they are connected to third party controllers which do not talk to the xantrex inverter.

Many thanks
Paul
· Share on Twitter

Comments

  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,935 ✭✭✭✭✭✭
    #2
    Re: Xantrex wind controller

    Xantrex software really has been something that ......
    For wind on the XW system the only guy I would use who writes the software and does the solar and the wind also is Dan Lennox.
    http://www.briery.com/

    Also read the XWCC manuals!
    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net

    · Share on Twitter

Categories