ashleysyanga: Does my wind turbine have a built in regulator?

This discussion was created from comments split from: 12v DC wind turbine - and connecting straight to 2 large 12v batteries..

Comments

  • ashleysyangaashleysyanga Posts: 1Registered Users
    Does my 12VDC 300W WIND GENERATOR V2 have an inbuilt charge controller and can I connect it direct to my 12 volt battery?
  • mike95490mike95490 Posts: 7,924Solar Expert ✭✭✭✭
    ashleysyanga said:  Does my 12VDC 300W WIND GENERATOR V2 have an inbuilt charge controller and can I connect it direct to my 12 volt battery?
    I'm going to state the obvious :  What does the manual say ?
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • BB.BB. Posts: 27,933Super Moderators, Administrators admin
    I have created your own discussion--It makes it easier to keep things straight. Your system, your Q&A.

    As Mike asks, really need to know what turbine you have? A link to the wind turbine would help.

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
Sign In or Register to comment.