Pyranometer with modbus connection

jwrgormanjwrgorman Registered Users Posts: 16 ✭✭
Hi,

I was interested in collecting some data from a pyranometer, and wondering if anyone had any experience with any pyranometers that are solid.  We like Modbus in general so that would be the preferred method but interested in any recommendations for quality instruments.

Thanks, John
John Gorman / SolarNetwork Foundation
e:john@solarnetwork.net

Comments

  • mike95490mike95490 Solar Expert Posts: 7,364 ✭✭✭✭
    I see and understand your post, but I have no info other than with a tiny bit of google assistance, I found this
    https://www.hukseflux.com/product/sr20-d2-pyranometer

    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • jwrgormanjwrgorman Registered Users Posts: 16 ✭✭
    Thanks Mike! I will check that one out, I think they tend to be expensive but looks very good. 
    John Gorman / SolarNetwork Foundation
    e:john@solarnetwork.net
Sign In or Register to comment.