New zinc air improvements (A three-layer nanoparticle catalysts improve zinc-air batteries)

LumisolLumisol Registered Users Posts: 374 ✭✭✭

Comments

  • mike95490mike95490 Solar Expert Posts: 7,308 ✭✭✭✭
    You do understand this is useless for solar, as zinc-air batteries are non-rechargeable, you just install new zincs.   And their output is measured in milliamps.  Great for hearing aids though,
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • LumisolLumisol Registered Users Posts: 374 ✭✭✭
    The forum is new battery technologies, not new solar battery or rechargeable battery. I thought it might be of interest to some who are inclined to tinker with electronic devices.
Sign In or Register to comment.