stmar ✭✭✭

  • Re: Load when Equalizing/Conditioning AGMs

    I have the manual, that is where I got the 31 volt for 8 hours eq procedure. Thanks for the other threads, I will read through them. I have the battery temp monitor that displays on my SCP. During th…
    ·
  • Re: Load when Equalizing/Conditioning AGMs

    My inverter is a Schneider Conext SW4024. It should be capable of maintaining the 31 volts needed for equalizing. I will have to check what voltage the RF16 can handle, I think max is 32 volts. May b…
    ·
  • Re: AGM Battery Temps

    I must not be understanding the manual. Here is what I was referring to from the maual:"The conditioning charge should then be applied by charging for 8 hours.At 77°F (25°C), the conditioning vo…
    ·
  • Re: AGM Battery Temps

    With my old Trace I had the BTS attached to the side of the battery but the manual for the new SW4024/SCP said to attach it to the terminal if possible for a more accurate reading. It would have been…
    ·
  • AGM Battery Temps

    This time of year my batteries show mid 60's to 70 temperatures per the SCP Battery Temperature Sensor which is hooked to a negative terminal on the the battery bank. When I do the equalization/condi…
    ·