-
Re: First Electric Car - Finding a Level2 220V charger for setup for my Off-Grid House
Thanks all. This is great input. The “total continuous output” of 2550 is certainly a little less than I had thought it would be. So for now, my likely path is to wire the charger off my pre-inverter…1 · -
Re: Switching from Wet to Lithium?
I am a month or so in and absolutely happy with these simplify batteries. They do not have a closed-loop BMS and I went through many of the same thoughts you are going through. I run a schneider CSW4…1 · -
Re: Switching from Wet to Lithium?
Update: I made the switch to 3 x 3.8kw lithium @ 24v. I couldn't be happier so far. I had to make sure every schneider component had the latest greatest firmware. (some settings wouldn't take in the …1 · -
Re: Schneider XW6848+ and MPPT-60 are displaying different battery voltages
Dave - Boy, I wish the combox could log wiring issues like this, but there were no errors or other issues. This was a mind tease for my dual MPPT setup for months and I also thought it had been light…1 · -
Re: Schneider XW6848+ and MPPT-60 are displaying different battery voltages
Following up on bringing the negative from the panels needing to wire through the MPPT; glad that made some small progress. This was a mind tease for my dual MPPT setup for months and I also thought …1 ·