-
Re: MidNite Solar DIY Series
My XW inverter does not have high enough voltage, but with NiFe, I don't have to fully charge them, my PV controllers can get them all the way full when the sun eventually returns1 · -
Re: Gateway/XW6048 compatibility?
My XW6048 plays well with Gateway. My combox died, so I have no way to test them together, but I did hear they confuse each other. Gate way reads all XW6048 data fine, I've not had need to alter any …2 · -
Re: XW+ not load shaving while in sell to grid mode.
Looks to my untrained eye, that the Load Shave Amps slider is set to 0 I'm not gridtie, so I've never dealt with those settings1 · -
Re: lithium battery BMS... are any of the Chinese BMS offerings good above 100 Amps?
And you (sadly) have "discovered" one of my major beefs about Li batteries, the BMS is generally a P.O.S. Dozens of little wires with lame terminations, PCB's that may or may not have gone …1 · -
Re: My Batteries are not charging, please help
a 48v charge controller will be unable to recharge a 120v battery post more details please, models, Mfg's1 ·