-
Re: Not sure I've got an inline ammeter hooked up correctly. Not getting the reading I wanted
I've used a couple of those little meters previously. I got one from EBay and one from Amazon. They are all identical, rebranded by lots of companies. I never used the 20A internal shunt version, but…1 · -
Re: Victron BMV settings not right?
Lead acid battery voltage as an indicator of SoC is only a rough approximation. Beyond that I really don't have any answer to your question. I think @littleharbor2 has a pretty good hint to follow. M…1 · -
Re: 48v lifepo4 battery voltage query
I should add that 54.6V (which is only 3.4125V per cell) is pretty low. You didn't say why you want to charge to such a low voltage. If you could get to 3.45V / cell (55.2V) or even all the way up to…1 · -
Re: LifepO4 battery recommended max charge current in a series-parallel connections
55.2V is a good conservative setting for both bulk and absorption. I would probably set the absorption time to something more like 40-60 minutes, and set the tail current (which I think Outback calls…1 · -
Re: LifePO4 Cycle & Voltage Recommendations
A few points to consider: * Charging at 14.6V is taking it to the 3.65V per cell (4 cells per 12V battery, 8 for a 24V battery). That is the absolute maximum that the manufacturers recommend. Most pe…1 ·