-
Re: The right way to connect DC terminals
IMHO, the lug probably goes on first, then the washer (to spread load over more of the lug), then lock washer, and nut last.1 · -
Re: Solar Battery Setup is draining faster and faster
In that heat, you could be losing a couple of volts Vmp. Assuming 60cell panels in parallel, which are marginal for mppt charging a 24v nominal bank, the controller may not be able to charge properly…1 · -
Re: Please check my knowledge about solar and battery sizing.
With two strings, string fusing is optional. With three or more, each series string should be fused so a short in one string doesn't get fed by current from multiple good strings. You'd still want a …1 · -
Re: outback mate
Rebulk is a voltage setting that will trigger another bulk/absorb cycle. For example, say your bank gets full in the morning. You go into the workshop and do stuff with power tools. Meanwhile, it got…1 · -
Re: ligwyd: Design my the perfect system
The way I would (and did) do the pv wiring, is to get premade mc4 wire about 2x long enough to reach from each string to a weatherproof junction box located somewhere relatively easy to access and wo…1 ·
