-
Re: Schneider XW 6848+ with generator question
Graham - when the generator begins the cool down cycle it is immediately taken off line - there is no load on the generator. At least that is what the Gateway is showing and that is what the generato…1 · -
Re: Charger Xantrex 6048
You may be overloading your generator. I have my 9 kw generator AC 2 breaker set for 35 amps and limit the charge rate to 65%. That provides enough head room to carry the typical house loads and char…1 · -
Re: achieving Generator "Warm- Up" time using Schneiders older COM Box and AGS???
Yes this can be done, but you can’t do it thru the SCP. You have to do it using the Com Box front end software. When you get to the AGS settings you have to click on advanced settings. There are litt…1 · -
Re: Batteries old and generator died.... time for an update/upgrade?
If you are using a Schneider AGS you can program the generator warm up time in the advanced configuration set up.1 · -
Re: XW6848+ settings when using two generators?
Thanks a Dave. Sounds like you’ll need to use a straw during your Happy Hours for the time being - bummer!1 ·