-
Re: Battery always sitting at half
Assuming your sealed batteries are AGM (lead acid Absorbed Glass Matt) type... Then you should see around 14.4 volts (at 70F) for 2+ hours on the batteries to be fully charged. You can also monitor t…1 · -
Re: Outback Power Flexmax 80 stuck in "Charged mode.
A DC circuit breaker, DC rated switch, or a large Knife type disconnect would work (DC arcs sustain much "better" than AC arcs--So DC switches are heavier duty/rated for (typically) lower v…1 · -
Re: Outback Power Flexmax 80 stuck in "Charged mode.
Here is an Outback thread or two from last year--Did not see any resolution--Just some questions so far: https://forum.outbackpower.com/viewtopic.php?f=29&t=8601 https://forum.outbackpower.com/vi…1 · -
Re: Circuit layout help for charging 12V battery with DC wind turbine generator
We generally do not have a lot of detailed discussion about wind here... Here are some wind related links and forums that do discuss DYI wind projects in detail: Wind Power Links www.otherpower.com (…1 · -
Re: batteries/ cold weather
Re: batteries/ cold weather If you can qualify your loads and design your system "up front"--you will save coming back 4 years later and trying to figure out going from 12 volt to 24 volt b…1 ·
