-
Re: GENERATOR FOR SUBMERSIBLE PUMP
This site has a lot of information about generators/inverters and inductive loads (movie lighting and such). Good read: http://www.screenlightandgrip.com/html/emailnewsletter_generators.html There ca…1 · -
Forum was down for a day or so...
Everyone, Yes the forum was down yesterday due to a couple of mix ups between us and our hosting service. Hopefully, everything in the back offices will soon be fixed. I don't think it will happ…2 · -
Re: High voltage Low Amps-Watts
Welcome to the forum LabPadre, Is this the charge controller? https://www.renogy.com/rover-60-amp-mppt-solar-charge-controller/ It is rated for 140-150 VDC max panel input voltage... And what are the…1 · -
Re: High voltage Low Amps-Watts
I should add... The charge controller will only draw current if the batteries need charging and/or you have DC loads turned on when the sun is up. I am sure you are comfortable with running solar cha…1 · -
Re: XW + 6848 Schnieder inverter switching to 40 Hz after generator shut down
I am not the expert... But the usual first steps are to turn off all power to the system (AC/DC) and reboot after 5 minutes. If that does not work, clear the memory/set to factory defaults, reboot, a…1 ·
