-
Re: Have i stuffed a new Battery
Hmm, learn something new every day (exposed plates sulftate, not corrode from exposure to air/oxygen): http://support.rollsbattery.com/support/solutions/articles/5964-battery-sulfation -Bill2 · -
Re: Finally hooking up my system, have some questions
Then, very roughly, you outback charge controller (80 amp?) can manage about 2x larger array. And AH rating for batteries? Bill1 · -
Re: Frigidaire on modified sine power
Yea--A power factor of ~0.50 is pretty bad for an induction motor. Lots of losses (eddy currents, I^2R heating losses, etc.) when running with an MSW inverter. If you are happy with the operation of …1 · -
Re: Klein CL800 Meter
I agree--If it is a clamp meter, you probably did not do any damage to the meter when set to current mode while measuring current. -Bill1 · -
Re: Sharing PV input with two different MPPT inverters
Sharing the Array between two MPPT controllers should not cause damage (that I can think of). Except--MPPT charge controllers (as far as I know) are NOT isolated electrically between array and batter…1 ·
