-
Re: need more info on making a BTS from earlier info
Is this the right file? (attached PDF): And, here is the Outback Forum count to temperature conversion info: http://www.outbackpower.com/forum/viewtopic.php?p=14411#14411 -Bill1 · -
Re: How to extend Battery Bank time of failure?
The first guess... In general, early Positive Post Extrusion for lead acid type batteries is made worse by (excessive?) gassing during charging. The oxygen formed during charging (and EQ charging whi…1 · -
Re: Need advice charging LifePO4 with IOTA DLS-90
Here is a link to the IQ4 LiFePo4 charger module which is rated to charge to 14.7 volts: https://www.altestore.com/static/datafiles/Others/IQ-LIFEPO_Manual.pdf It says it will charge to 14.7 volts...…1 · -
Re: Need advice charging LifePO4 with IOTA DLS-90
In general, LiFePO4 batteries are best kept "on the shelf" at around 50% SoC (say 20% to 80% range)... They have very low self discharge (assuming no loads)--And can sit unused for years wi…1 · -
Re: Li Time battery in parallel with Ography
As a starting point, if both batteries are at the same state of charge (terminal voltage), then yes they can be paralleled--If the batteries are not at the same state of charge, you can have high cur…1 ·
