Anawa ✭✭✭

  • Re: Battery Diagnostics

    Thanks for chiming in Wit! It’s been a very long time. I also bought (2) GB 12-85-13’s based upon your recommendations. I then advised my nephew to buy the GB 1,100 Ah this post is all about! As I re…
    ·
  • Replacing Off-Grid FLA’s with ?

    I jumped in on the tail-end of another discussion about battery bank replacement last week, but y’all had already gone on and the thread stopped. Looking for advice from the sage cadre that monitor t…
    ·
  • Re: Battery charging problems

    62.8v for the EQ that is maintained fairly steady. I make seasonal adjustments on the absorb voltage, 59.6 - 60.4. 
    ·
  • Re: Battery charging problems

    I may be off-base with this comment, but absorb at 56v seems low for a forklift battery. I have to set mine to the 60v range to get the SG to 1.285. I use 56v for my float.
    ·
  • Re: Battery charging problems

    I'm not sure the forklift manufacturers recommended charging rates are appropriate for batteries when they are used in off-grid PV applications. There's a lot of conversation and opinions about this …
    ·