-
Re: help with setting up a genset to autostart with 3 wire
I have been using a GSCM-Mini to AGS my system for 4.5 years with no significant problem. THe only thing you have to figure out is the choke. Most 3-wire gensets have a manual choke that you have to …1 · -
Re: Batteries not reaching float
I do use End Amps. It's set to 3.7A. I don't have a known load for a 48V system that I can use, so I'll just let them sit for the 4 hours that was suggested earlier. I'm also working on ways to reduc…1 · -
Re: Batteries not reaching float
OK. I will go get some new voltage measurements tomorrow. I will charge for a while in the AM and then disconnect the older string and let them rest for 4 hours and then measure voltages. What I find…1 · -
Re: What make and model batteries do you use?
I have 16 GC2s (48v bank) that are about a year and a half old. Many people start with GC2s since they are inexpensive but provide a reasonably good capacity. I have a generator that I use for cloudy…1 · -
Re: Is it necessary to run a refrigerator 24/7.....
I have my regular fridge on a timer.. Off at 11PM and on again at 6AM. NO troubles at all. Make sure you have enough thermal mass in the fridge. I put a few gallons of water in the top to act as a th…1 ·