Seeking replacement blades Windseeker 503

denlow1
denlow1 Registered Users Posts: 10 ✭✭
I am looking for a source for replacement blades for an old Southwest Windpower Windseeker 503. My 24v model came with with the upgraded carbon impregnated polypropylene blades, hub, and nosecone. Any help would be appreciated. If unable to secure replacements, would it be possible to perhaps paint the 15 + year old blades to repair sun damage?

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    Look at  http://scoraigwind.co.uk/  and maybe http://www.utterpower.com for ideas about making blades



    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,