skystream 3.7:

System
System Posts: 2,511 admin
Anyone have some good information on the skystream 3.7?

They have a good website at the following link:

http://www.skystreamenergy.com/skystream/

but I need info on their marine and battery charging versions.

Thanks,

Simon

Comments

  • System2
    System2 Posts: 6,290 admin
    Re: skystream 3.7:

    I found some more info. Cleverly hidden in the owners manual. :-o

    Anyone have one of these, sounds pretty amazing.

    Simon
  • Windsun
    Windsun Solar Expert Posts: 1,164 ✭✭
    Re: skystream 3.7:

    We have heard of a few problems....
  • System2
    System2 Posts: 6,290 admin
    Re: skystream 3.7:

    I am about to see one in action in the next few days. Could you please elaborate on these "problems"?

    thanks,

    Simon
  • System2
    System2 Posts: 6,290 admin
    Re: skystream 3.7:

    I'd like to hear more about what problems they might have?
    I'm putting in a skystream 3.7 right now and everyone that I've talked to that owns one has been very happy.

    Just curious?...

    Josh
  • Windsun
    Windsun Solar Expert Posts: 1,164 ✭✭
    Re: skystream 3.7:

    Some of the early electronics packages had some component problems.

    That apparently has been fixed, at least we have heard of no more occurances now for 3-4 weeks.
  • System2
    System2 Posts: 6,290 admin
    Re: skystream 3.7:

    That is good to hear. We are going with a skystream 3.7 for our project in Colombia. The dealer I have been talking with has admitted there were some issues but they seem to be ironed out.

    Simon
  • System2
    System2 Posts: 6,290 admin
    Re: skystream 3.7:

    We have installed two Skystreams so far.
    http://www.youtube.com/watch?v=06LA7mh7WdE

    One did have a relay problem, not releasing the break after the initial 5 min. after grid connect. SW did send us a replacement kit including relayboard and communication board and that issue was perfectly solved:)

    The other Skystream currently does not communicate with the Remote Meter and we are trying to sort that out as we speak. It did function in the past though.

    So far all the know issues with the Skystream are being solved by SW.

    Another thing that I think SW has to work on is the kWH monitoring on the Remote Meter, because it does not work, yet. The Datalogger is showing WattHours, but the besides the production, the consumption is also added to that number???