-
Re: Generator Enclosures
I built a shed (for a 4kw diesel) out of 6x6 timbers with type 'X' drywall lining. Higher frequencies can be attenuated pretty easily, but low frequencies need mass. The mass also smooths out ambient…3 · -
Re: Adding Batteries-Outback Inverter, Renogy 40A MPPT
Just to clarify the voltage and state of charge thing, assuming lead-acid batteries, 25.46v would be about full for a bank resting with no loads or charging sources for some time (like hours). If the…1 · -
Re: Can't reach float; dead cell
The absorb setpoint for both the charge controller and inverter/charger should adjust for battery temperature. The setpoint will be adjusted lower for warm/hot batteries, or higher for cool/cold batt…2 · -
Re: Noob with panels/batteries/batteries/batteries and LOTS of questions
Re point 1 and trouble keeping FLA batteries warm... fully charged lead acid won't freeze (to ~ -75°). Even at 50% charged it has to be pretty darned cold to freeze them. Low temp does reduce capacit…1 · -
Re: small system design
@garynappi - I have a bunch of these as ceiling/pot lighting: https://www.leevalley.com/en-ca/shop/hardware/lighting/75326-indoor-4-watt-white-led-downlight Also some strip lighting and a couple of 1…1 ·