- Last Active
- Solar Expert
mcgivor, the best advice I ever got from an electrician was when working in the service panel, always keep one hand in your back pocket. Doesn't mean you're not going to get bit, but that you won't provide a path to ground through your heart.
You could disconnect the temp sensor and disconnect the battery and a/c loads from the inverter and then reconnect the battery only and see if the inverter restarts.
Yep, Mr. "B" has the patience of a Saint..
The battery negative plates are a lead alloy grid, covered in a paste, which is then temporally placed in a plastic case. The cases are then loaded into baskets and loaded in a dry charge machine, which dries the plates in a nitrogen rich atmosphere. That is how the plates are dry charged. I used to work for a company designing, manufacturing and supplying the equipment to most of the major company’s you are all familiar with. Kept dry, the dry charged plates can remain active for many years. The battery plates are not fully formed out until they are placed in the battery case, filled with electrolyte and put on the charge station.1