Need help configuring a Schneider ComBox for Remote Access

BB.
BB. Super Moderators, Administrators Posts: 33,433 admin
This discussion was created from comments split from: schneider context XW6848, 5548, 4048 inverter opinions?.
Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset

Comments

  • gbaig
    gbaig Registered Users Posts: 32 ✭✭
    I need help in configuring ComBox for remote monitoring. I tried several ways but not able to see performance outside home network. I have a Service Provider router and Combox is connected with a separate router which is connected to ISP router. Thanks in advance
  • BB.
    BB. Super Moderators, Administrators Posts: 33,433 admin
    Please feel free to start your own threads for your questions and configuration. It will usually make things less confusing (people discuss/answer your questions, not somebody else up thread).

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    You are out of my field, I don't have my combox wired to the internet..
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,