Midnite Chinook 200, anyone have one?

machinemanmachineman Posts: 126Solar Expert ✭✭✭
Just wondering how these are..  I want to replace my existing junk Windtura 750 mill which the slip ring fails constantly. I don't need big power, just reliability.

Comments

  • BB.BB. Posts: 27,776Super Moderators admin
    edited March 4 #2
    This guy?

    https://www.solar-electric.com/midnite-solar-mnchinook200-48-wind-turbine.html

    Instead of slip rings, an alternative is to simply use a (properly rated outdoor) cord down the tower and a plug at the bottom. In theory, most wind turbines yaw equally to the right and lift--And do not wind up the cord. If (over the months/years) the cord winds up, just disconnect it at the bottom of the tower and unwind.

    Slip rings seem (at times) to not be worth the costs and low reliability that many have experienced.
     
    -Bill

    PS: Looks like our host (Northern Arizona Wind & Sun) sells them... They have been trying to find reliable wind turbines to sell for quite a long time--Calling them for their experience may be a good idea.

    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
  • machinemanmachineman Posts: 126Solar Expert ✭✭✭
    Yep, that's the one..  
  • Deveak_KaizenDeveak_Kaizen Posts: 13Registered Users ✭✭
    Kind of a low output but than again most windmills I have seen VASTLY out state the output. Knowing midnite, its probably quality and well engineered though.

  • westbranchwestbranch Posts: 5,087Solar Expert ✭✭✭✭
    I believe the Chinooks were spawned from a Military contract, for use on the back of a (moving?) jeep, etc...
    Compare to the Air X specs... no match in my eye...
     
    KID #51B  4s 140W to 24V 900Ah C&D AGM
    CL#29032 FW 2126/ 2073/ 2133 175A E-Panel WBjr, 3 x 4s 140W to 24V 900Ah C&D AGM 
    Cotek ST1500W 24V Inverter,OmniCharge 3024,
    2 x Cisco WRT54GL i/c DD-WRT Rtr & Bridge,
    Eu3/2/1000i Gens, 1680W & E-Panel/WBjr to come, CL #647 asleep
    West Chilcotin, BC, Canada
Sign In or Register to comment.